One Ball Brass Waxing Brush

3" x 5" Used to remove old wax from base and adds structure to base.

Brass brushes are commonly used to brush oxidized base material, dirt, and old wax off a base surface before waxing.

Instructions:

• Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).

• Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!

• With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.

• Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.

• Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.