Ledge Doctor is an easy, hand mixable, high strength epoxy putty ledge repair compound with a strong bonding force that quickly rebuilds concrete or stone grindable surfaces.

Shrink and crack resistant

Bonds to virtually any surface. Concrete, stone, metal, wood, plastic, etc.

Sets in 15- 25 minutes. Skateable after 1 hour. For best results, let cure for 24 hours.

INSTRUCTIONS: Make sure surface to be repaired is clean and free of wax, dust, and debris. Remove pre-existing wax with wire brush, file, griptape scraps, or heat.

• CUT - Cut or twist off required amount
• MIX - Thoroughly knead with fingers for about 1 minute to a uniform color
• APPLY - Firmly press into area to be repaired and match shape of ledge. Use tube as a roller to flatten out surface. Add more if necessary. Remove any excess.

• The cleaner the surface, the better the bond!
• Works best if applied within 2 minutes of mixing!
• Less is more! It's always easier to add more than take some away!